C
OPYRIGHT
&
T
RADEMARKS
Specifications are subject to change without notice. Copyright © 2016 Pepwave Ltd. All Rights Reserved. Pepwave and the
Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks
of their respective owners.
Language
Choose a language for the administration interface.
7.1.2 Firmware
The
Firmware
section lets you check the firmware version currently used by your
access point, as well as check for and install new firmware via online download.
You can also upgrade your firmware using a firmware file stored locally.
To check for new firmware, click the
Check for Firmware
button. If new firmware
is available, your access point will automatically download and install it.
To upgrade your access point using a firmware file on your network, click
Choose File
to select the firmware file. Then click
Manual Upgrade
to initiate
the firmware upgrade process using the selected file.
Note that your access point can store two different firmware versions in two
different partitions. A firmware upgrade will always replace the inactive partition.
If you want to keep the inactive firmware, simply reboot your device with the
inactive firmware and then perform the firmware upgrade.
7.1.3 Time
The settings in this section govern the access point’s system time zone and allow
you to specify a custom timeserver.
Time
