Pepwave AC0P, Руководство пользователя

Страница: 19 / 52

C OPYRIGHT & T RADEMARKS
Specifications are subject to change without notice. Copyright © 2016 Pepwave Ltd. All Rights Reserved. Pepwave and the
Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks
of their respective owners.
SNMPv3 User Settings
SNMPv3 User
Name
Enter a user name to be used in SNMPv3.
Authentication
Protocol
Select one of the following valid authentication protocols:
● NONE
● HMAC-MD5
● HMAC-SHA
When HMAC-MD5 or HMAC-SHA is selected, an entry field will appear for the
password.
Authentication
Password
Enter a password to use with the selected authentication protocol.
Confirm
Authentication
Password
Re-enter the authentication password.
Privacy Protocol
Select
None
or
CBC-DES
as the SNMPv3 privacy protocol. When
CBC-DES
is
selected, an entry field will appear for the password.
Access Mode
Select Read Only or Read and Write as the SNMPv3 access mode.
Status
Use these controls to enable or disable SNMPv3 access.
7.1.6 Controller
In the Controller section, you can set up Peplink InControl or AP Controller
remote management.