C
OPYRIGHT
&
T
RADEMARKS
Specifications are subject to change without notice. Copyright © 2016 Pepwave Ltd. All Rights Reserved. Pepwave and the
Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks
of their respective owners.
Default Gateway
Enter the IP address of the default gateway to the internet.
DNS Server
Enter the DNS server address that your access point will use to resolve host names.
Advanced
Management
VLAN ID
This field specifies the VLAN ID to tag to management traffic, such as AP-to-AP
controller communication traffic. The value is
0
by default, meaning that no VLAN tagging
will be applied. NOTE: change this value with caution as alterations may result in loss of
connection to the AP controller.
Spanning Tree
Protocol
Checking this box enables spanning tree protocol, used to prevent loops in bridged
Ethernet LANs
Scheduled
Reboot
When this box is checked, your access point can be scheduled to reboot automatically
on a recurring basis, as indicated by the values under the
Schedule
,
Day
, and
Time
headings.
Ethernet
Speed/Duplex
Select a speed and duplex setting for sending and receiving. When selecting a speed
manually, you can also control whether the access point’s speed will be advertised on
the network by checking or unchecking the
Advertise Speed
box. When
Auto
is
selected, your access point will automatically negotiate speeds.
AP Mode
Your access point can act as a bridge or as a router, depending on your selection here.
When
Router
is selected, you can additionally select whether the access point will
function in
NAT
or
IP Forwarding
mode.
7.3.2 LAN
This section offers a variety of settings that affect your access point’s operation
on the LAN, such as settings for DHCP, DMZ, and port forwarding. Note that the
following settings will be available only when your access point is operating in
