C
OPYRIGHT
&
T
RADEMARKS
Specifications are subject to change without notice. Copyright © 7/11/16 Pepwave Ltd. All Rights Reserved. Pepwave and the
Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks
of their respective owners.
SNMPv3
This option allows you to enable SNMP version 3.
To add a community for either SNMPv1 or SNMPv2c, click the
Add SNMP
Community
button in the
Community Name
table, which displays the following
screen:
SNMP Community Settings
Community Name
Enter a name for the SNMP community.
IP Address/IP
Mask
These settings specify a subnet from which access to the SNMP server is allowed.
Enter the subnet address here (e.g.,
192.168.1.0
) and select the appropriate subnet
mask.
Access Mode
Select
Read Only
or
Read and Write
as the SNMP community access mode.
Status
Use these controls to enable or disable SNMP community access.
To define a user name for SNMPv3, click
Add SNMP User
in the
SNMPv3 User
Name
table, which displays the following screen:
