C
OPYRIGHT
&
T
RADEMARKS
Specifications are subject to change without notice. Copyright © 2016 Pepwave Ltd. All Rights Reserved. Pepwave and the
Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks
of their respective owners.
●
If European region is selected, RF channels 1 to 13 will be available. The
maximum transmission power will be 20 dBm (100 mW).
NOTE: Users are required to choose an option suitable to local laws and regulations.
Per FCC regulation, the country selection is not available on all models marketed in the
US. All US models are fixed to US channels only.
Channel Bonding
There are three options:
20 MHz
,
40 MHz
, and
20/40 MHz
. With this feature enabled,
the Wi-Fi system can use two channels at once. Using two channels improves the
performance of the Wi-Fi connection.
The AP One AC mini offers channel bonding options for the 2.4GHz and 5GHz bands,
as shown below. In addition to
20 MHz
,
40 MHz
, and
20/40 MHz
, the 5Ghz band offers
80Mhz
, which is the default setting.
Channel
This drop-down menu selects the 5GHz 802.11 channel to be used. If
Auto
is set, the
system will perform channel scanning based on the scheduled time set and choose the
most suitable channel automatically.
The AP One AC mini allows setting channels on the 2.4GHz and 5GHz bands, as shown
below.
Output Power
This drop-down menu determines the power at which your access point will broadcast.
When fixed settings are selected, the AP will broadcast at the specified power level,
regardless of context. When
Auto
is selected, the AP will adjust its power level based
on surrounding APs to maximize performance.
While single-radio models allow setting power output levels for one frequency band only,
the AP One AC mini provide output power settings for both the 2.4GHz and 5GHz
bands, as shown below.
Beacon Rate
This drop-down menu provides the option to send beacons in different transmit bit rates.
The bit rates are
1Mbps
,
2Mbps
,
5.5Mbps
,
6Mbps
, and
11Mbps
.
Beacon Interval
Set the time between each beacon send. Available options are
100ms
,
250ms
, and
500ms
.
DTIM
Set the frequency for the beacon to include delivery traffic indication messages (DTIM).
The interval unit is measured in milliseconds.
RTS Threshold
Set the minimum packet size for your access point to send an RTS using the RTS/CTS
handshake. Setting
0
disables this feature.
Fragmentation
Enter a value to limit the maximum frame size, which can improve performance.
