C
OPYRIGHT
&
T
RADEMARKS
Specifications are subject to change without notice. Copyright © 7/11/16 Pepwave Ltd. All Rights Reserved. Pepwave and the
Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks
of their respective owners.
Port Forwarding
section.
Port Forwarding
Service Name
Enter a name for the new port forwarding rule. Valid values for this setting consist of
alphanumeric and underscore “_” characters only.
IP Protocol
The
IP Protocol
setting, along with the
Port
setting, specifies the protocol of the service
as TCP, UDP, ICMP, or IP. Traffic that is received by your access point via the specified
protocol at the specified port(s) is forwarded to the LAN hosts specified by the
Servers
setting. Please see below for details on the
Port
and
Servers
settings.
Alternatively, the
Protocol Selection Tool
drop-down menu can be used to
automatically fill in the protocol and a single port number of common Internet services
(e.g., HTTP, HTTPS, etc.). After selecting an item from the
Protocol Selection Tool
drop-down menu, the protocol and port number remain manually modifiable.
Port
The
Port
setting specifies the port(s) that correspond to the service, and can be
configured to behave in one of the following manners:
Single Port
,
Port Range
,
Port Mapping
Single Port
: Traffic that is received by your access point via the specified protocol at the
specified port is forwarded via the same port to the servers specified by the
Server IP
Address
setting. For example, with
IP Protocol
set to
TCP
, and
Port
set to
Single Port
and
Service Port
80, TCP traffic received on port 80 is forwarded to the configured
servers via port 80.
Port Range
: Traffic that is received by your access point via the specified protocol at the
specified port range is forwarded via the same respective ports to the LAN hosts
specified by the
Server IP Address
setting. For example, with
IP Protocol
set to
TCP
,
and
Port
set to
Port Range
and
Service Ports
80-88, TCP traffic received on ports 80
through 88 is forwarded to the configured servers via the respective ports.
Port Mapping
: Traffic that is received by your access point via the specified protocol at
the specified port is forwarded via a different port to the servers specified by the
Server
