C
OPYRIGHT
&
T
RADEMARKS
Specifications are subject to change without notice. Copyright © 7/11/16 Pepwave Ltd. All Rights Reserved. Pepwave and the
Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks
of their respective owners.
Location
Enter a name to identify the location of your access point. This name can be retrieved
via SNMP.
Admin User
Name
This field specifies the administrator username of the web admin. It is set as
admin
by
default.
Admin Password
This field allows you to specify a new administrator password. The default password is
public
.
Confirm Admin
Password
Re-enter the admin password.
Web Admin
Interface
Check this box to turn on the web administration interface, which allows remote AP
management.
Security
Choose
HTTP
or
HTTPS
as the protocol to use when accessing the web admin
interface. To automatically redirect HTTP access to HTTPS, check
HTTP to HTTPS
Redirection
.
Web Admin Port
Specify the port number on which the web admin interface can be accessed.
Allowed Source
IP Subnets
This field allows you to restrict access to the web admin to only defined IP subnets.
●
Any
- Allow web admin accesses from anywhere, without IP address
restrictions.
●
Allow access from the following IP subnets only
– Restricts the ability to
access web admin to only defined IP subnets. When this option is chosen, a text input
area will appear:
Enter your allowed IP subnet addresses into this text area. Each IP subnet must be in
the form of
w.x.y.z/m
.
w.x.y.z
represents an IP address (e.g.,
192.168.0.0
), and
m
represents the subnet mask in CIDR format, which is between 0 and 32 inclusively. For
example:
192.168.0.0/24.
To define multiple subnets, separate each IP subnet, one per
line. For example:
192.168.0.0/24
10.8.0.0/16
