C
OPYRIGHT
&
T
RADEMARKS
Specifications are subject to change without notice. Copyright © 2016 Pepwave Ltd. All Rights Reserved. Pepwave and the
Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks
of their respective owners.
Settings
.
Download Active
Configurations
Click
Download
to backup the current active settings.
Upload
Configurations
To restore or change settings based on a configuration file, click
Choose File
to locate
the configuration file on the local computer, and then click
Upload
. The new settings
can then be applied by clicking the
Apply Changes
button on the page header, or you
can cancel the procedure by pressing
discard
on the main page of the web admin
interface.
7.1.8 Reboot
This section provides a reboot button for restarting the system. For maximum
reliability, your access point can equip with two copies of firmware, and each
copy can be a different version. You can select the firmware version you would
like to reboot the device with. The firmware marked with
(Running)
is the current
system boot up firmware.
Please note that a firmware upgrade will always replace the inactive
firmware partition.
7.2 AP
Use the controls on the
AP
tab to set the wireless SSID and AP settings, as well
as wireless distribution system (WDS) settings.
7.2.1 Wireless SSID
