Configuration
22
1980
2010
-0
2
60
Event notification, tab
Event
Parameter
Description
Default
Event
Notification
Control Code
Switches event notification on or off ("Wireless" = on).
The following parameters in this table can only be edited if
Event Notification Control Code
is set to "Wireless".
Otherwise they are grayed out.
Off
Device Index
Selects the device via its long tag for which the burst mode
applies.
• <Adapter Long Tag>: Adapter parameters are
transmitted.
• <Device Long Tag>: Device parameters are
transmitted.
For HART devices of Revision 5 or lower, the "Message"
serves as the long tag (see chapter 4.1).
–
Event
Notification
Retry Time
Period between retransmissions of the event notification.
The event notification continues to be retransmitted until
anacknowledgement of the event is received.
00:30:0
0
Maximum
Update Time
Maximum period in seconds that may elapse between
successive event notifications. If no event occurs, the
adapter will publish an event notification after this time has
elapsed.
00:30:0
0
Event Debounce
Interval
The amount of time that a condition must persist before
the event notification is sent out.
00:30:0
0
Event Status
Indicates whether a particular event notification has been
sent and is still unacknowledged.
• Configuration Changed Event pending
• Device Status Event Pending
• More Status Available Event Pending
–
First unACK
Time
Indicates the time in seconds an event notification has
remained unacknowledged.
–
Table 5.7: Event notification, tab
Event
