Pepperl+Fuchs WHA-ADP Series, Руководство пользователя

Страница: 44 / 93

WHA-ADP-*
Configuration
22
1980
2010
-0
2
44
5.3 Identification Parameters
The identification parameters provide various information about the device and identify the
device within the network.
Figure 5.4: Identification parameters
Identification Parameters
Parameter Description Default
Long Tag Identifies the device in a WirelessHART network. Enter up
to 32 characters.
–
Device Tag Identifies the field device within the process plant. Enter up
to 8 characters.
–
Descriptor Further description of the device. Enter up to 16
characters.
–
Date Code Date of last parameter change. Format: DD.MM.YYYY 01.04.2
009
Message User defined message. Enter up to 32 characters.
–
Polling Address HART address of the adapter on the wired interface, valid
range 0 ... 63. Since the long tag and MAC address are
used to identify the device in the WirelessHART network, it
is not necessary to give different devices different polling
addresses. 15
Serial Number Serial number of the device as read from the adapter.
Order Code Order code of the device as read from the adapter.
Order Ident Order identification of the device as read from the adapter.