Configuration
22
1980
2010
-0
2
47
Wireless Communication Parameters
Parameter
Description
Default
Network
Identification
Unique network ID of the WirelessHART network the
device is supposed to join. Enter up to 5 digits
(0 ... 99999).
–
Wireless
Operation Mode
Indicates current mode of operation of the device:
• Idle: waiting for trigger to start join procedure
• Active Search: searching for neighboring
WirelessHART devices
• Negotiating: connection parameters are being
exchanged with the network manager (gateway)
• Quarantined: network manager has temporarily
stopped the device from joining the network
• Operational: device is connected to the network
• Suspended: network manager has permanently
stopped the device from joining the network
• Deep Sleep/Ultra-low Power/Passive Search: adapter
is inactive
–
Radio Power
Power of the radio signal emitted by the device. The
selection and the default value depend on the
Country
Code
parameter.
0 dBm
Join Key Part
x
of 4
The join key is the password for the network the device is
to join. Enter 32 decimal characters. There are four text
fields which can hold eight characters each.
–
Join Shed Time
Time (hh:mm:ss) that the device is given to join the
network after the
Join Mode
condition has been fulfilled.
After this time has elapsed, the device will keep on trying
to join the network using a low duty-cycle receive mode to
reduce energy consumption (yellow COM LED off).
00:40:0
0
Join Mode
Method by which the device is to join the network.
• Do not attempt to join
• Join now
• Attempt to join immediately on powerup or reset
Attempt
to join
immedi
ately ...
Execute Join
Press the button to store the
Join Shed Time
and
Join
Mode
parameters to the device. The device will attempt to
join the network in the way that is specified in
Join Mode
.
–
