AS-i/PROFIBUS-Gateway
Command Interface
Subject to reasonable modifications due to technical advances.
Copyright Fuchs, Printed in Germany
Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
Is
s
ue dat
e -
12.
8.
2007
75
1. Following commands are supported:
1
: S-7.4 ID string Read (no sent data required).
2
: S-7.4 Diag String Read (no sent data required).
3
: S-7.4 Param String Read (no sent data required).
4
: S-7.4 Param String Write (buffer contains sent string).
5
: S-7.5 Transfer. Buffer contains sent string in the same form, as the telegram,
that have to be sent over AS-i.
6
: S-7.5 Cyclic 16-Bit Slave Configuration Read (analog/transparent bits are
cancelled in the response). The cyclic 16-bit configuration cannot be detected,
if the response is 08h.
7
: Safety Monitor sorted Read (no sent data required).
8
: Safety Monitor unsorted (all devices) Read (no sent data required).
Please view <chapter 10.4.2 Monitor Diagnosis> for further information.
Response
Byte
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
1
4E
16
2
response
