AS-i/PROFIBUS GatewayAS-i/PROFIBUS-Gateway
Operating in Advanced Display Mode
Subject to reasonable modifications due to technical advances.
Copyright Fuchs, Printed in Germany
Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
Is
s
ue dat
e -
12.
8.
2007
33
7.5.9
AS-i address assistent
A S - I A D D R E S S
A S S I S TA N T
O N
N E X T A D D R E S S T O
P R O G R A M 1 A
The AS-i address assistant helps you to set up the AS-i circuit quickly. Once you
have stored the AS-i configuration, the AS-i address assistant addresses a new
AS-i slave with address zero to the desired address.
Selecting "Assistant on" or "Assistant off" switches the AS
-
i address assistant on
or off. The current state of the AS
-
i address assistant is displayed:
Assistant on: AS
-
i address assistant is switched on.
Assistant off: AS
-
i address assistant is switched off.
Procedure:
1. Store AS-i Configuration to the master. This can be done very comfortably with
the Windows software AS-i-Control-Tools (Master | Write configuration to the
AS-i Master ...), or directly with the fullgraphic display (see chapter 7.5.8).
2. All AS
-
i slaves have to be addressed to 0 or to the desired address. The slaves
must be disconnected from the AS
-
i circuit.
3. Start the AS
-
i address assistant.
4. Now connect the AS-i slaves one after the other. The last line of the display of
the AS-i address assistant shows which AS-i slave has to be connected next.
7.5.10
LOS (list of offline slaves)
L O S L I S T O F
O F F L I N E S L AV E S
S E T A L L
C L E A R A L L
See also "Advanced Diagnostics for AS-i Masters", chapter 8.
With "Clear all" and "Set all" you can delete or set a single bit for each AS-i slave
address. Underneath there is a list of all slaves, by which the LOS bit can be set
or deleted by individualy selecting of the LOS bit.
Empty field: LOS bit deleted
X:
LOS bit set
7.5.11
Auto Adr Enable (enable automatic address)
A U T O A D D R E S S
E N A B L E
CHANGE
With this function can the programming of the automatic address be released or
locked.
