SmartRunner Matcher*
Operation
2
018-
01
47
6.2
Code Card Mode
The built-in camera function including LED lighting allows for parameterization using Data
Matrix control codes. The control codes are generated using the "Vision Configurator"
operating software. All sensor parameters can be specified in a Data Matrix control code. For
this purpose, the Data Matrix control code is placed in front of the camera. The control code is
registered immediately and decoded. The sensor automatically activates the parameters
contained within. So a large number of sensors can be put into operation easily and quickly.
Generating a control code
1. In the menu bar, select
Administration > Create reader programming code
.
2. In the
Device type
section, select sensor type
SMARTRUNNER
.
3. Select the required parameters in the
Select function
section.
The control code is displayed in different sizes in the
Control Code
section.
4. To print the control code, click
or
Print preview
.
To save the control code, click
Save image
.
Figure 6.1
Generating a control code
Tip
It is also possible to generate control codes when no sensor is connected to Vision
Configurator. In this case, you can, for example, generate a control code to assign a particular
IP address to a sensor and then establish a connection with a PC.
