Pepperl+Fuchs SmartRunner Matcher страница 54 Скачать руководство пользователя

Страница: 54 / 59

018-

SmartRunner Matcher*

Maintenance and Repair

7.1

Maintenance

The device is maintenance-free. To get the best possible performance out of your device, keep

the optical unit on the device clean, and clean it when necessary.
Observe the following instructions when cleaning:



Do not touch the optical unit with your fingers.



Do not immerse the device in water. Do not spray the device with water or other fluids.



Do not use a scouring agent to clean the surface of the device.



Use a cotton or paper cloth moistened with water or isopropyl alcohol (not soaked).



Remove any residual alcohol using a cotton or paper cloth moistened with distilled water

(not soaked).



Wipe the device surfaces dry using a lint-free cloth.

7.2

Repair

The device must not be repaired, changed, or manipulated. In case of failure, always replace

the device with an original device.

Danger!

Risk of death due to electrical current!
Contact with live parts causes immediate risk of death.



Allow only qualified electricians to carry out work on the electrical installation.



Switch off the power supply before carrying out maintenance, cleaning, and repairs, and

prevent the supply from being switched on again.



Keep the live parts free from moisture.

Содержание SmartRunner Matcher




























































Результаты поиска

Содержание SmartRunner Matcher

Отзывы:

Похожие инструкции для SmartRunner Matcher

Бренды по названию

Популярные бренды

Pepperl+Fuchs SmartRunner Matcher, Руководство пользователя

Результаты поиска

Содержание SmartRunner Matcher

Отзывы:

Похожие инструкции для SmartRunner Matcher

Бренды по названию

Популярные бренды