2
018-
01
38
SmartRunner Matcher*
Vision Configurator Software
Match Menu Item
You can adjust the x and z tolerance range for the sensor under the
Match
menu item. The
tolerance range determines by how much the height profile may move within the evaluation
range and still be recognized.
Figure 5.23
Match Menu Item
Designation
Function
Object contrast
Contrast threshold used to detect the laser line on the object.
Tolerance object
"Tolerance object" is used to input the width of the envelope curve
around the taught-in object in 0.1 mm increments. The envelope curve
is the basis for the quality parameters. The width of the envelope
curve should be selected so that all good part profiles are located
within the envelope curve despite height profile deviations.
Tolerance X
Maximum permitted displacement of the object within the evaluation
range in the X direction.
Tolerance Z
Maximum permitted displacement of the object within the evaluation
range in the Z direction.
Quality Good
Quality threshold that distinguishes good parts from bad parts.
Quality Variation
Quality threshold that distinguishes good parts from bad parts.
Quality Outliers
Quality threshold that distinguishes good parts from bad parts.
Note!
More information about the
Quality parameters
can be found in the chapter on image display
under
Result View
(see chapter 5.6).
