2
018-
01
40
SmartRunner Matcher*
Vision Configurator Software
Save Parameter Settings
The following description only applies to the "VLM350-F280-R4-1001
and
VLM350-F280-R4-
1101". The
Save job
function is used to save parameter data to a read/write tag. This makes it
possible to save settings for different profiles on a read/write tag. You have the option to load
the saved parameters at any time on your sensor. 3 different file types are available to save the
parameters on a read/write tag.
The file types have the following properties:
Figure 5.25
Save Parameter Settings
Position
Designation
Function
1
Fuchs Config Files
(*.SMARTRUNNER_pfc)
Saves all parameter settings including
communication parameters for 1 profile
2
Fuchs Parameter Set
(*.SMARTRUNNER_pfs)
Saves all parameter settings without
communication parameters for 1 profile
3
Fuchs Complete
Parameter Set
(*.SMARTRUNNER_pfa)
Saves all parameter settings without
communication parameters for 32 profiles
1
3
2
Note!
A parameter file stored on the read/write tag can only be opened using the
Vision
Configurator
software.
Note!
Please note that the transferred parameter files overwrite the current parameters on the
Vision
Configurator
software. This can lead to data being lost.
