Pentair INTELLITOUCH, Руководство пользователя

Страница: 92 / 128

IntelliTouch
®
Control System User’s Guide
82
Setting up the Remote Control Telephone Feature
The remote control telephone feature allows you to switch on a feature by calling the Indoor Control
Panel via the telephone.
You can only use this feature the
TELSPA
needs to be connected to the Personality board COM port,
and the phone line.
The following describes how to switch on your spa remotely. You can also scroll through the list of
available features and set any one of them. This feature can also be used by a macro circuit (see page
80).
To setup the telephone remote control:
Go to the
Spa RF and Phone Remotes
screen.
1. Press the button next to
CONFIGURE MOD-PHONE
to access the Phone Remote setup screen.
2. Press the top left button next to NONE.
3. Press the
Up
or
Down buttons to scroll through the available circuit names until you find the function
you would like to assign to the telephone remote. Choose the function you will use most often,
for example
SPA
allows you to call the system and switch on spa filtration and heating with one
command.
Note:
If you are using the remote to turn on your spa, you must also enable “
MANUAL
HEAT
.” This allows the heater to always switch on whenever the spa is switched on via the
telephone. For more information, see page 77.
4. Press the
Save
button to save the setting and return to the remotes screen.