Pentair INTELLITOUCH, Руководство пользователя

Страница: 124 / 128

IntelliTouch
®
Control System User’s Guide
114
Glossary
(Continued)
Personality Board:
The circuit board mounted on top of the Outdoor Control Panel motherboard. The
Personality board defines the system capabilities.
Personality Kit: Set of parts to define the capability of a system. Can include, temperature sensors,
actuators, and additional relays, actuators.
Power Center:
Same as Load Center with the exception of the circuit breaker base.
Relay Circuits:
The circuits that control the relays on the Personality Board. Connectors on top edge of
the circuit board.
Screw Terminal Connector:
Removable connector that may attach to circuit board with multiple
sockets (anywhere from 2 to 12) to receive wires from controllers and sensors; wires held by screw
terminals; multiple wires of a small enough gauge (usually 22 AWG) may be coupled to a single socket
of a terminal connector.
Transceiver: Circuit board with attached antenna that can send and receive radio frequency (wireless)
transmissions.
Screw Terminal:
Removable connector that may attach to circuit board with multiple sockets
(anywhere from 2 to 12) to receive wires from controllers and sensors; wires held by screw terminals;
multiple wires of a small enough gauge (usually 22 AWG) may be coupled to a single socket of a
terminal connector.
System Personality: The capability of a system to operate a set of equipment, independent of the kind
of controller or other accessories; system personalities include “shared equipment” (i5+3, i7+3, i9+3),
“dual equipment” (i10+3D), or “single body of water” (i5S+3, i9+3S).
Temperature Sensor: Specially designed probe for measuring temperature of the air or pool water; 10k
Ohm thermistor.
Terminal Connector:
Removable connector that may attach to PCB with multiple sockets (anywhere
from 2 to 12) to receive wires from controllers and sensors; wires held by screw terminals; multiple
wires of a small enough gage (usually 22 AWG) may be coupled to a single socket of a terminal
connector.
Two-Speed Pump Relay:
Relay to toggle a two-speed pump from low-speed to high-speed operation;
does not turn pump on or off.
Transceiver: Special printed circuit board that can send and receive radio frequency (wireless)
transmissions.
QuickTouch QT4: Provides switching of up to four remote control circuits from a wireless Hand-held
Remote.
Valve Module:
Accessory PCB (P/N 520285) to increase auxiliary actuator outputs from two to five.