Pentair INTELLITOUCH, Руководство пользователя

Страница: 11 / 128

IntelliTouch
®
Control System User’s Guide
1
Section 1
IntelliTouch
®
Control System Overview
Introduction
Welcome! Your IntelliTouch
®
Control System for Pool and Spa will change the way you view pool
and spa controls. This innovation in pool and spa automation offers complete freedom for you
while having full automation control over your pool, spa, lights, heater, pump, cleaners and much
more. You can now schedule multiple start and stop times to control your lights, heater, spa jets, and
filter pumps. Using the IntelliTouch
®
Indoor Control Panel or IntelliTouch MobileTouch
®
Wireless
Controller you can control your pool, spa, and lights from anywhere inside or outside or your home.
Optional controllers are also available such as the wireless Digital Tablet, iPhone, iPad or iPod
Touch interface (purchased separately), and in-wall Touch Screen that can interface with your PC.
IntelliTouch is a scalable system that can be upgraded to a completely integrated home automation
solution including audio, security, climate, irrigation and more. For more information about using
these interfaces, refer to the ScreenLogic
®
2 Interface Kits on page 5.
IntelliTouch Control System Overview
An IntelliTouch control system can include five (5) to 40 high voltage relays circuits that can be used
to control any combination of pumps, lights, water features. A maximum of ten (10) relays can be
housed in an IntelliTouch control system Load Center or Power Center. Up to three (3) Load Centers
or Power Centers can be connected to a main Load Center for a maximum of 40 relays. User-
configurable circuits can be used to control equipment. The “Feature Macro” circuits feature allows
any number of circuits to be combined and controlled by a single button. An optional IntelliTouch
control system Dimmer Module (P/N 520406) can be installed for use to dim any high voltage
incandescent light such as Pentair Amerlite
®
and Pentair SpaBrite
®
Lights. The dimmer module
supports multiple lights from 100 watts up to 1,000 watts and installs in a standard relay location.
Any number of dimmers (up to 10 maximum) may be used with a maximum combined load of 4,000
watt in a single Load Center.
In the home
The IntelliTouch control system can utilize multiple wired and wireless controllers including the
Digital Tablet, iPhone or iPad Touch interface (purchased separately), the wired in-wall Touch
Screen, Indoor Control Panel, and the wireless MobileTouch
®
Wireless Controller. Your existing
home PC can also be used to control the IntelliTouch system via the ScreenLogic
®
Interfaces. A
maximum of four ScreenLogic2 interfaces can be used, for example, four Tablets or four in-wall
Touch Screen’s, or four PC’s in any combination.
Around the pool
The IntelliTouch control system, SpaCommand
®
Spa-Side Remote and iS4 Spa-Side Remote provide
control buttons for various pool and spa functions. The SpaCommand spa-side remote also provides
a temperature display.
At the equipment pad
The pool pump, filter, and various IntelliTouch control system remote controllers and interfaces are
connected to the IntelliTouch control system Load Center and/or Power Center enclosure which
are located at the equipment pad. The Load Center enclosure is where the high voltage lines from
the circuit breaker panel junction box at the home are connected to. The pool service person can
periodically check pool operations from the Load Center. Also at the equipment pad there are
system pool and spa pipes connected to the pump, heater and filtration system. Mounted on top the
valves are motorized valve actuators (with attached 25 ft cable for wiring) used to automatically
change the direction flow of water through the plumbing system. There are also temperature sensors
and a cable that connects to the heater.