P
P
E
E
S
S
1
1
9
9
0
0
0
0
G
G
i
i
G
G
S
S
M
M
R
R
e
e
p
p
e
e
a
a
t
t
e
e
r
r
— Chapter 5. Installing the Growth Cabinet
PES1900NR Operations Manual
88
Figure 66 Hardware Setting Dialog
Step 10 – Exit RepeaterNet, then Restart
Step 11 – Configure the Second Channel
Use the RepeaterNet software to configure the second channel, assigning the appropriate channel
number and gain settings.
Step 12 – Enable both channels’ Power Amplifiers
1. Select Configuration/Channel 2 from the RepeaterNet menus.
2. Click on the PA Control tab.
3. In the PA Control tab, set the gain of the F2 box, to match the existing setting for the primary
repeater, F1 box.
4. Click on the power boxes, to change the forward and reverse Power Amplifier settings from
OFF to ON.
5. Click the Apply button, and then click the OK button.
6. Select Configuration/Channel 1 from the RepeaterNet menus.
7. Click on the PA Control tab.
8. Click on the power boxes, to change the forward and reverse Power Amplifier settings from
OFF to ON.
9. Click the Apply button, and then click the OK button.
10. Exit the RepeaterNet software.
11. Turn off power to the repeater.