P
P
E
E
S
S
1
1
9
9
0
0
0
0
G
G
i
i
G
G
S
S
M
M
R
R
e
e
p
p
e
e
a
a
t
t
e
e
r
r
PES1900NR Operations Manual
Chapter 9. Configuring the Repeater — 139
PA Control Tab
The
PA Control
tab provides a switch to turn PA power ON or OFF (see Figure 124).
1. Click on the value in the
Reverse PA Power
box, and
in the
Forward PA Power
box,
to change the value.
The icon toggles between
ON
and
OFF
.
2. Click on the
Apply
or
OK
button, for the setting to take
effect.
•
The
Apply
button
changes the PA value,
and keeps the
Channel
Properties
screen open.
•
The
OK
button changes
the PA value, and closes
the
Channel Properties
screen.
Reverse Filter Tab
The
Reverse Filter
tab sets the alarm severity for the Reverse Channel Select Filter Alarm. A failure
in the Reverse Channel Select Filter assembly triggers a
CSF Reverse Filter
alarm, and the filter
becomes inoperative.
To redefine alarm severity for the
Reverse Filter
subsystem:
1. Click the down-arrow next to an
Alarm
field, to select one of the following alarm severity
settings:
•
Disabled
•
Event
•
Minor
•
Major
•
Critical
2. Click
the
Apply
or
OK
button.
The
Apply
button changes the alarm severity setting, and keeps the
Channel Properties
screen open.
The
OK
button changes the alarm severity setting, and closes the
Channel Properties
screen.
NOTE:
The Reverse Filter tab is similar to the Channel Forward Filter tab, shown in Figure 125.
Figure 124 Channel Properties Screen,
PA Tab