© PCE Instruments
1
Eng
li
s
h
Thank you for purchasing a PCE-USC 30 from PCE Instruments.
1
Safety notes
Please read this manual carefully and completely before you use the device
for the first time. The device may only be used by qualified personnel and
repaired by PCE Instruments personnel. Damage or injuries caused by non-
observance of the manual are excluded from our liability and not covered by
our warranty.
The device must only be used as described in this instruction
manual. If used otherwise, this can cause dangerous situations for
the user and damage to the meter.
The instrument may only be used if the environmental conditions
(temperature, relative humidity, …) are within the ranges stated in
the technical specifications. Do not expose the device to extreme
temperatures, direct sunlight, extreme humidity or moisture.
Do not expose the device to shocks or strong vibrations.
The case should only be opened by qualified PCE Instruments
personnel.
Never use the instrument when your hands are wet.
You must not make any technical changes to the device.
The appliance should only be cleaned with a damp cloth. Use only
pH-neutral cleaner, no abrasives or solvents.
The device must only be used with accessories from PCE
Instruments or equivalent.
Before each use, inspect the case for visible damage. If any damage
is visible, do not use the device.
Do not use the instrument in explosive atmospheres.
The measurement range as stated in the specifications must not be
exceeded under any circumstances.
In operation with the flaw detector, it is necessary to observe the
safety measures while charging the storage battery unit of the flaw
detector by means of automatic charger.
In operation with the flaw detector an operator should be governed
by the safety standards in effect at the enterprise.
Non-observance of the safety notes can cause damage to the
device and injuries to the user.
