© PCE Instruments
6.1
Basic delivery set consists of the following components: .................................................53
7
Setting-up procedures ........................................................................ 53
7.1
The flaw detector is operated by one operator who has a corresponding level of
qualification and has studied the present operation manual. .....................................................53
7.2
Before operating charge the battery of flaw detector (if required) governed by the passport
of automatic charging device. ...................................................................................................53
8
Instructions for Use ............................................................................ 54
8.1
Single Coil Probe ............................................................................................................54
8.2
Reflection, Differential Probe ...........................................................................................54
8.3
Rotation Probe ................................................................................................................55
9
Maintenance ........................................................................................ 56
9.1
The flaw detector maintenance includes the maintenance inspection, operating repair and
calibration. ................................................................................................................................56
9.2
Intervals between the maintenance inspections are set depending on the industrial
conditions, but no less than once per month. Connecting cable fixation, condition of controls and
indicators are checked during the maintenance inspection. ......................................................56
9.3
The maintenance inspection includes an external examination and is performed by
attending personnel before starting the flaw detector electronic unit operation. .........................56
9.4
Replacement of the battery pack. ....................................................................................56
10
Typical Failures and Troubleshooting .............................................. 58
10.1
The list of the most common and probable failures is given in Table 9. ...........................58
Table 9
– Typical failures and troubleshooting ..........................................................................58
11
Transportation and Storage ............................................................... 58
12
Warranty ............................................................................................... 58
13
Disposal ............................................................................................... 59
