© PCE Instruments
31
Eng
li
s
h
Fig. 16
– Setup of “Type:
“ threshold level
"R:"
parameter variation allows change the inner radius of threshold
level. Height parameter variation is carried out in the range from 0 to 32768
with a step of 1; 10; 100; 1000; 10000 (see Fig. 16).
"W:"
parameter variation allows change the width of threshold level.
Radius parameter variation is carried out in the range from 0 to 32768 with a
step of 1; 10; 100; 1000;10000 (see Fig. 16).
"
α:"
parameter variation allows change turning angle of threshold level
relative to the complex plane centre. Turn angle variation is carried out in the
range from 0˚ to 359˚ with a step of 1˚; 10˚; 100˚ (see Fig. 16).
"
β"
parameter variation allows change turning angle of threshold level.
Turn angle variation is
carried out in the range from 0˚ to 180˚ with a step of
1˚; 10˚; 100˚ (see Fig. 16).
Select the frame polarity "Pol:", which makes the alarm trigger:
– the signal gets beyond the limits of the threshold level;
– the signal is within the limits of the threshold level.
If the symmetrical displaying of threshold level on the position “Symm:”
with
,
keys is required, this parameter can be activated.
