© PCE Instruments
22
Eng
li
s
h
Navigation of the menu map described below is performed with the help of
the following keys:
The instrument menu is divided in five inserts: "TEST", "SETTINGS", "VIEW",
"MEMORY", "CALIBRATION", the first and the fourth ones are also divided in
submenus.
4.5
“TEST” Menu
"Test" menu is displayed immediately after switching On the instrument (see
Figure13) and contains main settings an operator will need to set during
operation.
Fig.13
– “TEST” menu
In this menu, an operator can set (change) the settings of the selected
frequency, the values of operating frequency, gain and preamplifier,
generator voltage, initial phase of signal, filter type and its parameter, input
type, general scale and independently to axles, position of complex plane
center as well as set up ALARM and general flaw detector parameters.
