© PCE Instruments
11
Eng
li
s
h
Table 7
– Description of connector for eddy current probe (ECP)
and eddy current rotary scanner
Pin Signal
Lemo
EGG.2B.312CLL
(front view)
1
Gen Ret
2
Gen Out
3
+12V Battery
4
Motor -
5
Motor +
6
Gnd
7
Dif Input 1
8
Dif Input 2
9
Synchro Input
10
Motor On
11
Rotary On
12
Alarm LED
3.3
Function keys
Automatic flaw alarm by the first and second frequencies,
respectively, and by the mix of the 1st and 2nd frequencies, as well as
overloading alarm square. If ALARM triggers during testing, the signal
amplitude and phase are automatically measured and the signal is evaluated
by the calibration curve.
Function keys
Respectively:
"F1 Balancing", "F2 Full-screen mode", "F3 Centering"
– in "TEST" menu;
"F1 Import data", "F2 Export data "
– in “MEMORY” menu;
"F1 Load", "F2 Create/ Save","F3 Delete"
– in "RESULTS"/"SETTINGS"
submenu;
"F1 An" (An - amplitude noise)
– in "VIEW" menu;
"F2 OK” save calibration curve – in "CALIBRATION" menu.
