© PCE Instruments
32
Eng
li
s
h
Setup of "Trapezium" type frame
To set up cut-off type frame, operator should select "Type:
" in special
item of settings ALARM
–
(see Figure 17).
Fig. 17
– Threshold level setup "Type:
"
"X1:"
parameter variation allows to change the angle position of threshold
level in X1-direction. X1 parameter variation is carried out in the range from -
32768 to 0 with a step of 1; 10; 100; 1000; 10000 (see Fig. 17).
"X2:"
parameter variation allows to change the angle position of threshold
level in X2-direction. X2 parameter variation is carried out in the range from
0 to 32768 with a step of 1; 10; 100; 1000; 10000 (see Fig. 17).
"Y1:"
parameter variation allows to change the angle position of threshold
level in Y1-direction. Y1 parameter variation is carried out in the range from -
32768 to 32768 with a step of 1; 10; 100; 1000; 10000 (see Fig. 17).
"Y2:"
parameter variation allows to change the angle position of threshold
level in Y2-direction. Y2 parameter variation is carried out in the range from
32768 to
- 32768 with a step of 1; 10; 100; 1000; 10000 (see Fig. 17).
Select the frame polarity "Pol:", which makes the alarm trigger:
– the signal gets beyond the limits of the threshold level
– the signal is within the limits of the threshold level.
