© PCE Instruments
35
Eng
li
s
h
To press the
button for entering the instrument menu «SETTINGS» and to choose «Test
mode» - «CONDUCTIVITY».
Fig.18
– “Conductivity” Test Mode
To press
to enter the «TEST» menu. In the menu «TEST» under the position «Current
set», to choose by
,
buttons the appropriate setting for the measurement at a
specified frequency and to press the
button to activate the settings. «CP13
– 60 kHz»;
«CP13
– 480 kHz».
Fig. 19
– Choosing and activating Settings “CP 13 – 60 KHZ”
After settings activation make calibration at standard samples
Note
–
For setting up procedure, use certified calibration blocks only.