background image

 

15

This fan is used to propel hot air into the room. There is no adjustment for the convection fan. The convection fan 

is factory set and is controlled by the heat level selected (1-5).

 

Convection fan

Control panel functions

Menu 2 icon, 

is accessible only when the unit operates in normal mode.    

                          This mode is divided into 4 tabs (A to D).

Tabs A: 

Calibration of the fuel delivered to the burner. The calibration settings 

can  increase  or  decrease  the  amount  of  fuel  per  hour,  ranging  from  -3  to   

                

+3. Refer to page 20 and 21 for more information. 

Important: Setting -3 , -2 and -1 are not functional for heat level 1 and  

s1, +2, +3 are are not functional for heat level 5.

Note: Press the OK icon to accept your selection and exit the menu.

Tabs B: 

Press on the 

enable thermostat icon

 to activate or deactivate the 

thermostat mode. The X in the top box confirms that the thermostat is activated.

           

Press 

enable mixing mode

 icon to activate or deactivate the mixing mode. The 

X in the bottom box confirms that the mixing mode is activated. The mixing mode 

can’t be selected when the thermostat is activated. See page 21.

Note: Press the OK icon to accept your selection and exit the menu.

Tabs C: 

The top time counter displays the number of days, hours, minutes and 

seconds since last startup of the unit. 

The lower time counter displays the number by order of days, hours and minutes 

since the first startup of the unit. 

 

 

 

 

 

 

Note: Press the OK icon to accept your selection and exit the menu.

Tabs D: 

Log book data is to review the operational status and analyzing  

possible error codes.

Note: Press the OK icon to accept your selection and exit the menu.

1A = Meter indication of overall time. Left to right, months, days, hours and             

        minutes. 

2A = Meter indication of running time. Left to right, days, hours, minutes and            

        seconds.  

3A = The log book status. 

4A = The log book recording date.  

5A = The log book recording hours. 

Tabs D: 

Press the Open log icon to view the list by dates of each startup of the 

unit. Select a date to display the log. 

1A

2A

4A

5A

3A

Содержание RAFAEL 55






































Отзывы: