Parker DCP3 Скачать руководство пользователя страница 33

Страница: 33 / 71

Drive Controlled Pump

Parker Hannifin Corporation

Hydraulics Group

DCP Manual innen A4 UK.indd 06.11.17

Manual

The Display

• The top line of the display is used to show the drive

status

• The central region of the display shows the selected

parameters or navigation menu

• The bottom line of the display indicates the action as-

sociated with the soft keys

• The actions of the soft keys are context dependent
• The central navigation and editing keys are referred to

as UP, DOWN, LEFT, RIGHT and OK

• The Run, (green), and Stop, (red), keys are used to

start and stop the motor when the drive is in local con-
trol mode.

Keys

The nine keys of the Graphical Keypad are divided into three groups. These are the Run and Stop keys, the soft

keys and the central navigation and editing keys

Key

Operation Description

RUN

Only operates when Local start / stop control mode is active
Control Runs the motor

STOP

Control Stops the motor when local start / stop control mode is active. Trip reset Resets any trips.

Softkey 1

Navigation Displays the previous level’s menu
Edit Aborts the edit, leaving the value unchanged

Softkey 2

Changes the Local/Remote Mode selection

Navigation Displays the next menu level or parameter. Changes to edit mode when a parameter is selected.
Edit Accepts the value of the displayed parameter Long Press, (greater than 1s): Displays information about the
selected parameter.

Navigation Moves up through the list of parameters
Edit Increments the value of the displayed parameter

DOWN

Navigation Moves down through the list of parameters
Edit Decrements the value of the displayed parameter

LEFT

Navigation Displays the previous level’s menu
Edit Selects the digit to be changed

RIGHT

Navigation Displays the next menu level or parameter
Edit Selects the digit to be changed

Softkey 1

Содержание DCP3








































































Результаты поиска

Содержание DCP3

Отзывы:

Parker DCP3, Руководство по установке, Страница: 33 / 71

Результаты поиска

Содержание DCP3

Отзывы: