Paradox DGP2-641, Справочное и монтажное руководство

Страница: 9 / 44

Digiplex/DigiplexNE LCD Keypad 7 n
to a zone in the control panel and the zone's parameters must be
defined. For more information on zone assignment, please refer to
the Digiplex or DigiplexNE Reference & Installation Manual. Please
note that even with the ATZ (zone doubling) feature enabled, the
keypad supports only one detection device.
2.2 PROGRAMMABLE OUTPUT
Each keypad has one on-board PGM. A PGM is a programmable
output that toggles to its opposite state (i.e. a normally open PGM will
close) when a specific event has occurred in the system (see section
5.0 on page 20). Upon activation, the PGM can provide 50mA to any
device connected to it. If the current drawn is to exceed the current
limit, a relay should be connected to the PGM as shown in Figure 1.
With the DGP2-641AC keypad, the PGM is reserved for the door lock
(refer to Figure 4 on page 10).