Panasonic ZEQUO 2200, Руководство по эксплуатации

Страница: 70 / 726

6. Access Control List (ACL) Commands
70
6.5. config time_range
 Description
This command is used to define a specific range of time to activate a function on the
Switch by specifying which time range in a day and which days in a week are covered
in the time range. Note that the specified time range is based on SNTP time or
configured time. If this time is not available, then the time range will not be met.

Format
config time_range <range_name 32> [ hours start_time < hh:mm:ss> end_time<
hh:mm:ss> weekdays <daylist> | delete]
 Parameters
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
<range_name 32>
Specify the name of the time range settings.
hours start_time
Specify the starting time in a day. (24-hr time). For example, 19:00 means 7PM. 19 is also
acceptable. The start_time must be smaller than the end_time.
< hh:mm:ss>
Specify the time.
end_time
Specify the ending time in a day. (24-hr time)
< hh:mm:ss>
Specify the time.
weekdays
Specify the list of days contained in the time range. Use a dash to define a period of days.
Use a comma to separate specific days. For example, mon-fri (Monday to Friday)
sun, mon, fri (Sunday, Monday, and Friday)
<daylist>
Specify a list of days.
delete Delete a time range profile. When a time range profile has been associated with ACL
entries, the deletion of this time range profile will fail.