Panasonic ZEQUO 2200, Руководство по эксплуатации

Страница: 694 / 726

68. Web-based Access Control (WAC) Commands
694
68.16. show wac auth_state ports
 Description
This command is used to display the authentication state for ports.

Format
show wac auth_state ports {<portlist>}

Parameters
 Restrictions
None.

Example
To display the WAC authentication status of ports:
68.17. clear wac auth_state

Description
This command is used to clear the authentication state of a port. The port will return
to un-authenticated state. All the timers associated with the port will be reset.

Format
clear wac auth_state [ports [<portlist> | all] {authenticated | authenticating |
blocked} | macaddr <macaddr>]
<portlist>(Optional) Specify the list of ports whose WAC authentication state will be displayed.
Zxxx0:admin# show wac auth_state ports
Command: show wac auth_state ports
P:Port-based Pri:Priority
Port MAC Address Original State VID Pri Aging Time/ Idle
RX VID Block Time Time
------ -------------------- ---- -------------- ---- -- ----------- ----
31 00-05-5D-F9-16-76 1 Authenticating - - 27 -
Total Authenticating Hosts : 1
Total Authenticated Hosts : 0
Total Blocked Hosts : 0
Zxxx0:admin#