Panasonic ZEQUO 2200, Руководство по эксплуатации

Страница: 154 / 726

18. Debug Software Command List
154
To clear the debug buffer:
To upload the messages stored in debug buffer to TFTP server:
18.3. debug output

Description
Use the command to set a specified module's debug message output to debug buffer
or local console. If the user uses the command in a Telnet session, the error message
also is output to the local console.
When selecting to output to the debug buffer and there are debug
messages being outputted, the system memory pool will be used as the
debug buffer. The functions which will use the system memory pool
resource may fail to execute command such as download and upload
firmware, or save configuration. If you want to execute these commands
successfully, please use the command "debug buffer clear" to release the
system's memory pool resources manually first.

Format
debug output [module <module_list> | all] [buffer | console]
Zxxx0:admin# debug buffer utilization
Command: debug buffer utilization
Allocate from : System memory
Total size : 2 MB
Utilization rate : 30%
Zxxx0:admin#
Zxxx0:admin# debug buffer clear
Command: debug buffer clear
Success.
Zxxx0:admin#
Zxxx0:admin# debug buffer upload_toTFTP 10.0.0.90 debugcontent.txt
Command: debug buffer upload_toTFTP 10.0.0.90 debugcontent.txt
Connecting to server................... Done.
Upload configuration................... Done.
Zxxx0:admin#
ワヰヵユ ワヰヵユ