Panasonic ZEQUO 2200 Скачать руководство пользователя страница 202

Страница: 202 / 726

24. File System Management Commands

202

24.6. rename



Description

This command is used to rename a file in the file system. The pathname specifies the

file (in path form) to be renamed and the file name specifies the new file name. If the

path name is not a full path, then it refers to a path under the current directory for

the drive. The renamed file will stay in the same directory.



Format

rename {{unit <unit_id>} <drive_id>} <pathname> <filename>



Parameters



Restrictions

Only Administrator and Operator-level users can issue this command.



Example

To rename a file or directory:

unit

Specifies the unit ID in the stacking system. If not specified, it refers to the master unit.
<unit_id>

Enter the unit ID value here.

<drive_id>

Specifies the drive ID. If not specified, it refers to the current drive.

Specify the file (in path form) to be renamed.

Specify the new name of the file.

Zxxx0:admin#rename run.rom run1.rom
Command: rename run.rom run1.rom

Success.

Zxxx0:admin#

Содержание ZEQUO 2200























































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ZEQUO 2200

Отзывы:

Похожие инструкции для ZEQUO 2200

Бренды по названию

Популярные бренды

Panasonic ZEQUO 2200, Руководство по эксплуатации

Результаты поиска

Содержание ZEQUO 2200

Отзывы:

Похожие инструкции для ZEQUO 2200

Бренды по названию

Популярные бренды