Panasonic ZEQUO 2200, Руководство по эксплуатации

Страница: 454 / 726

49. Protocol VLAN Commands
454
49.Protocol VLAN Commands
Protocol VLAN is a function to determine a VLAN to which a port
belongs based on protocol information written in the header of a
receive packet.
You can specify the frame type of Ethernet ver2, Sub Network Access
Protocol (SNAP), or Link Logical Control (LLC) and map it to a VLAN.
49.1. create dot1v_protocol_group

Description
This command is used to create a protocol group for the protocol VLAN function.
 Format
create dot1v_protocol_group group_id <id> group_name <name 32>

Parameters

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To create a protocol group:
create dot1v_protocol_group group_id <id> group_name <name 32>
config dot1v_protocol_group [group_id <id> | group_name <name 32>] [add protocol
[ethernet_2 | ieee802.3_snap | ieee802.3_llc] <protocol_value> | delete protocol
[ethernet_2 | ieee802.3_snap | ieee802.3_llc] <protocol_value>]
delete dot1v_protocol_group [group_id <id> | group_name <name 32>| all]
show dot1v_protocol_group {group_id <id> | group_name <name 32>}
config port dot1v ports [<portlist> | all] [add protocol_group [group_id <id> | group_name <name
32>] [vlan <vlan_name 32> | vlanid <id>] {priority <value 0-7>} | delete protocol_group
[group_id <id> | all]]
show port dot1v {ports <portlist>}
group_idSpecify the ID of the protocol group which is used to identify a set of protocols.
<id> The ID range is between 1 and 16.
group_name
Specify the name of the protocol group.
<name 32>
Specify the name of the protocol group. The maximum length is 32 characters.