5. Names and functions
WMD078TE0PAA07
28
No.
Name
Functions
Initial current [INI-
TIAL] button
When Mode indicator (
) “WELD” is lit and the selected control
process
is “Ini.&Crater”, use it to specify or change the initial condition.
•
For each LED of Control process indicator (
) over this [INITIAL]
button (
)
- LED is on, the condition is set
- LED blinks, condition is changeable
(Use Output/Setting indicator1 select button (
), Output/Setting
indicator2 select button (
), Dial 1(
) and Dial 2 (
) to specify
the initial condition.)
Main welding [MAIN]
button
When Mode indicator (
) for WELD is lit and the selected control
process
is “Main welding”, use it to specify or change the main weld
-
ing condition.
•
For each LED of Control process indicator (
) over this [MAIN] but-
ton (
)
- LED is on, the condition is set
- LED blinks, condition is changeable
(Use Output/Setting indicator1 select button (
), Output/Setting
indicator2 select button (
), Dial 1(
) and Dial 2 (
) to specify
the main welding condition.)
Crater welding [CRA-
TER] button
When Mode indicator (
) “WELD” is lit and the selected control
process
is “Crater” or “Ini.&Crater”, use it to specify or change the cra
-
ter condition.
•
For each LED of Control process indicator (
) over this [CRATER]
button (
)
- LED is on, the condition is set
- LED blinks, condition is changeable
(Use Output/Setting indicator1 select button (
), Output/Setting
indicator2 select button (
), Dial 1(
) and Dial 2 (
) to specify
the crater condition.)
2
5
7
8
9
10
12
11
14
15
22
8
9
10
8
INITIAL
22
11
8
2
5
14
15
9
MAIN
22
11
9
2
5
14
15
10
CRATER
22
11
10
2
5
14
15
