5. Names and functions
WMD078TE0PAA07
26
No.
Name
Functions
Output/Setting dis-
play2
When Mode indicator (
) “RECORD” is lit (see page
117 page):
•
Immediately after switching to RECORD mode, or when oFF is
selected using Dial 2 (
), it indicates the voltage set value and
“oFF” alternately.
•
After selecting a channel using Dial 2 (
), it indicates the voltage
value for storage and the selected channel number alternately.
•
Select a channel and press ENTER (
), then it indicates “no”.
By further changing the channel with Dial 2 (
), it changes the indi-
cation from “no” to “
yES
” to “
dEL
” and back to “no”.
• Select “
yES
” to enter a channel name. At that time, the display indi
-
cates a 3-digit channel number.
When Setting indicator (
) “FREQUENCY”, “PULSE PEAK CURRENT”,
“PULSE BASE CURRENT” or “WIRE-FEED ADJUST” is lit:
•
It indicates the set value of the wave control or wire-feed adjust-
ment.
•
Use Dial 2(
) to set.
When Setting indicator (
) “DIRECT” (see page
126) is lit:
•
It indicates the set value of the selected item.
•
While switching items in DIRECT function, it indicates the submenu
number.
While holding down INCHING (
) button, and
when Mode indicator (
) “WELD
NAVI.
”, “DETAIL” or “RECORD” are
selected, it indicates “Act”. At that time, Output/Setting display 1 (
)
indicates “no”. The inching operation is disabled.
In case a self diagnosable error occurs:
The “error number” that indicates the error contents blinks on the dis
-
play. At that time, the “
Err
” blinks on Output/Setting display 1 (
).
1
4
15
13
29
22
24
4
4
22
15
15
13
15
24
15
24
29
22
1
1
