Panasonic YD-400VP1YHD, Руководство по эксплуатации

Страница: 27 / 154

5. Names and functions
WMD078TE0PAA07
27
No. Name Functions
Output/Setting dis-
play2
select button Use it to select voltage setting value, voltage adjusting value based on
unitary condition, or arc spot time.
• Press the button until the LED of the intended Output/Setting dis-
play 2 item indicator (
) is lit. Then the set value of the selected
item is indicated on the Output/Setting display 2 ( ).
• “Arc spot time” is selectable only when arc spot is set by pressing the
[ARC SPOT] button ( ).
Output/Setting dis-
play2
item indicator
When Mode indicator ( ) “WELD”, “CALL” or “RECORD” (see pages
120 and 117) is lit:
• The LED selected by Output/Setting display 2 select button ( ) is
lit.
When Mode indicator ( ) “WELD NAVI. ” or “DETAIL” (see page 77
and 82) is lit:
• LED is turned off.
Control process select
button [CONTROL] Use it to select “No crater”, “Crater” or “Ini.&Crater”.
•
As you select a control process, the LEDs of Control process indicator
(
) are lit as follows.
Note
In “Crater” or “Ini. & Crater” settings, if you want to perform crater
welding with no pulse, it is necessary to switch the “
PULSE BASE
CUR
”
settings (The submenu 08 of Group 1 “Welding parameters”
in DETAIL mode. (See page 82).
6 5
7
11
22
5 6
7
4
12
5
6
4
12
6
V
VOLTAGE
±V
UNITARY
s
TIME
22
5
22
7
CONTROL
11
No crater
Crater
Ini. & Crater