8. Various settings
WMD078TE0PAA07
80
3
．
Set the indicated setting item.
→
Turn Dial 2 to set WELD NAVI.
(Example: Select “1. FILLET”)
Press ENTER button.
→
Once the settings are saved,
the next setting item is indi-
cated on the first line of LCD.
Turn Dial2 until the desired set
value for THICKESS1 is displayed.
Select “rEt” to return the previous
setting item: JOINT SELECT.
Press ENTER button.
→
Once the settings are saved,
the next setting item is indi-
cated on the first line of LCD.
Turn Dial2 until the desired set
value for THICKNESS 2 is dis-
played.
Select “rEt” to return the previous
setting item: JOINT SELECT.
Press ENTER button.
Clockwise
Counter-clockwise
Direction of Dial2 rotation
for display value rise/fall
JOINT SELECT
- > 1.FILLET?
JOINT SELECT
- > 2.LAP?
JOINT SELECT
- > 3.BUTT?
JOINT SELECT
- > 1.FILLET?
to
t
o
THICKNESS1
- > RETURN?
THICKNESS1
- > 0
．
8 mm?
Set values vary with
material, wire diameter,
and gas. For example,
Mild steel, 1.2, CO
2
:
→
set value: 2.0 to 12.0
Mild steel, 0.8, CO
2
:
→
set value:0.8 to 6.0
～
～
THICKNESS2
- > RETURN?
THICKNESS2
- > 0
．
8 mm?
Set values vary with
material, wire diameter,
and gas. For example,
Mild steel, 1.2, CO
2
:
→
set value: 2.0 to 12.0
Mild steel, 0.8, CO
2
:
→
set value:0.8 to 6.0
