復旧/警報音停止
RESET/ STOP ALARM
電源
POWER
復旧/警報音停止
RESET/ STOP ALARM
電源
POWER
●
The Call 1 icon will turn off after approximately
3 minutes, and the area around the MENU
button will flash in red.
●
If the Call button is reset, the alarm stops. Also,
the area around the MENU button, ALARM
indicator on the call sub-base unit, and door
phone alarm display indicator turn off.
●
If a reset is performed within 20 seconds of the
button being pressed, the Call 1 icon flashes for
approximately 20 seconds after the button is
pressed, and then turns off.
●
The Call 1 icon can also be turned off within
3 minute. ( Page 155)
●
Up to 4 call buttons can be connected. The
screen display appears in accordance with the
configured installation settings.
Making Calls
164
165
Confirm that system components are properly installed before using the system.
Making Emergency Call Alarms
Confirm that system components are properly installed before using the system.
When the Call Button is Pressed
When the Call Button is Pressed
Call 1 icon
flashes in yellow
Procedures during alarms
●
Confirm the alarm details and then perform
the appropriate procedures.
●
Press the STOP ALARM button.
(The alarm can also be turned off from
the building manager room.)
How to stop the alarm sound
When the Call button is pressed, the system
reports the call.
Configure the emergency call alarm as the call function.
The emergency call alarm can also be configured as the toilet or bathroom
announcement. (Consult with the management company or the company that installed
the system.)
MENU button
Call sub-base unit
Call is ringing
Call 1 icon
flashes in red
MENU button
Call sub-base unit
ALARM indicator
Flashes in red
Alarm is sounding
Door phone
Alarm display indicator
Flashes in red
Alarm is sounding
●
The screen displayed during
emergency calls can also be
changed.
●
The location of the caller can also be
announced.
●
Alarms can continue after the pressed
button is released. (self-retention)
●
Reports made to the building
manager room and door phone can
be delayed.
●
Playback of the alarm from the door
phones can be disabled.
●
Reports made to the building
manager room can also be disabled.
Consult with the management
company or the company that
installed the system.
Note
Note
Note
Note
Note
Note
INTRODUCTION
USUAL USAGE
SETTING ACCORDING TO
YOUR PREFERENCES
OPERATIONS AND MEASURES
WHEN ALARM GOES OFF
SECURITY ALARM SETTING
AND DISARMING
RECORD
MANAGEMENT
OTHER
●
The Call 1 icon will turn off after approximately
1 minute, and the area around the MENU
button will flash in red.
●
If the Call button is reset, the call alarm stops,
and the area around the MENU button turns off.
●
If a reset is performed within 20 seconds of the
button being pressed, the Call 1 icon flashes for
approximately 20 seconds after the button is
pressed, and then turns off.
●
The Call 1 icon can also be turned off within
1 minute. ( Page 155)
●
Up to 4 Call buttons can be connected. The
screen display appears in accordance with the
configured installation settings.
does not appear in the call
sub-base unit with monitor.
●
Press the STOP ALARM button.
How to stop the call sound
Call procedures
●
Confirm the call details and then perform
the appropriate procedures.
Call button
Press
Call button
Press
When the Call button is pressed, the system reports the call.
●
For base unit
(Beeps)
(Siren) Please come
immediately.
●
For base unit
STOP ALARM
button
STOP ALARM
button
●
The screen displayed during calls
can also be changed.
●
The location of the caller can also
be announced.
●
Calls can continue after the
pressed button is released.
(self-retention)
●
The volume of the base unit
ringtone can be changed.
Consult with the management
company or the company that
installed the system.
does not appear in the call
sub-base unit with monitor.
Installer
Setting
Installer
Setting
Installer
Setting
