Panasonic VL-W1 Series, Руководство по установке и обслуживанию

Страница: 38 / 178

38
1-6-3 DIP switch
Set the operational options of the laser processing
machine with the DIP switch equipped on the controller
rear side.
ワㄐㄕㄊ㄄ㄆ
• A plastic cover is installed on the DIP switch. Install
this cover always to avoid the dust penetration to the
controller.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• The initial setting of all DIP switches is OFF.
• Turn OFF the power at DIP switch setting.
Item Description
No. 1 System reservation. Keep OFF state.
No. 2 Select the control method, I/O or command for some specific operations.
ON Control by serial communication commands for the following operations
• Laser pumping (LSR)
• Shutter open/close (SHT)
• Guide laser (GID)
• Laser radiation for measurement (SPT)
OFF Control by I/O for the following operations
• Laser power supply (Laser pumping)
• Shutter open/close
• Guide laser radiation
No. 3 Select the ON/OFF of the buzzer sound to notify the alarm or warning occurrence.
ON Disables the buzzer sound for alarm or warning state.
OFF Enables the buzzer sound for alarm or warning state.
No. 4 Select the ON/OFF of the password lock to change the screen mode from “Run” to
“Setting”. Refer to “When password is forgotten” (P.72).
ON Disables the password lock.
OFF Enables the password lock.
No. 5 Select the setting method of the remote mode.
ON Use the input signal of X5 “REMOTE IN” on I/O terminal.
OFF Use the remote switch on the front of the controller.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• When DIP switch No. 6 is ON, keep DIP switch No. 5 OFF.
ON
OFF
Rear of controller
VL-W1500, VL-W1506 VL-W1A00, VL-W1A06
DIP switch
ME-VLW1-SM-8