Panasonic VL-W1 Series, Руководство по установке и обслуживанию

Страница: 163 / 178

163
„
Lasing quality
Troubles Causes Measures
There is a decrease in
laser processing quality.
Laser emission port is not clean.
Refer to the “Maintenance” in Setup/Maintenance
Guide and clean contaminants off the laser
emission port.
If contaminants persist, replace laser emission
port protective glass.
Contact our sales office.
Fumes occurring during lasing hinder
laser beam.
• Install dust collector.
• Check that dust collector works well.
Distance to object is not appropriate.
Adjust distance between bottom surface of laser
processing machine head and lasing surface of
object.
Lasing surface of object is inclined.
Make adjustment so that bottom surface of laser
processing machine head and lasing surface of
object are parallel with each other.
There are variations in properties of
objects.
• Thickness varies.
• Surface roughness varies (including
those in gloss).
• Material varies (including those in
chemical composition).
Adjust the setting parameters and work distance
according to respective target objects.
Object feeder is not stable.
Adjust object feeder so that position of objects
become stable.
Performance of laser oscillator
deteriorates due to aging.
• Increase setting value of laser power.
• Decrease scanning speed.
If it is not possible to get the same laser
processing quality as before even with the max.
value of the laser power setting, laser oscillator
must be replaced. Contact our sales office.
Lasing does not work
partially.
Obstacle hinders laser beam.
Remove obstacle between laser emission port of
laser processing machine head and object.
Laser emission port is not clean.
Refer to the “Maintenance” in Setup/Maintenance
Guide and clean contaminants off the laser
emission port.
If contaminants persist, replace laser emission
port protective glass.
Contact our sales office.
Drawing line runs over
the intended start or end
points.
The setting in lasing quality parameters
does not match the other settings.
Adjustment the lasing quality parameters such as
laser starting, laser ending, or wait value in file
option menu.
ME-VLW1-SM-8