Panasonic VL-W1 Series, Руководство по установке и обслуживанию

Страница: 117 / 178

117
4-6-6 Select file
T1
T2
T4
T6
*2
*1
T5
T4
T3 T3
T3
T2
T1
SELECT 0-2 IN
(No.20-22)
D0 - D10 IN (No.3-13)
SET IN (No.2)
TRIGGER IN (X6)
READY OUT (Y6)
LASING OUT (Y7)
LASING END OUT
(Y8)
SET OK OUT (No.36)
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
File
number A
File number A
ready
File number B
ready
File
number A
File
number B
Item Time Remarks
T1 0.5 ms or more After a lapse of 0.5ms or more from specifying SELECT 0 IN to SELECT 2 IN and D0 IN
to D10 IN, turn on SET IN (No.2).
T2 0 ms or more Keep the input until SET OK OUT (No.36) turns on.
T3 20 to 510 ms One-shot output. Set the output time on the environment setting screen. There is a small
margin of error for the setting value.
T4 ― Setup time of the laser processing machine to start the lasing operation.
• In the laser pumping completed state: Time for data creation. It varies depending on
the quantity of the setting data.
• When the laser pumping is not completed: Time for data creation or time for laser
pumping, whichever is longer.
T5 10 ms or more Keep the ON status for 10 ms or more.
T6 0 ms or more To input the next file number right after TRIGGER IN (X6), input SET IN (No.2) after
LASING OUT (Y7) turns ON.
*1 : Turn off SELECT 0 IN to SELECT 2 IN (No.20-22) when you specify a file number.
*2 : You can input the next file number during the lasing operation. If the lasing operation was being executed when you
turned on SET IN (No.2), the file number changes after the lasing operation completes.
ME-VLW1-SM-8