Panasonic VL-W1 Series, Руководство по установке и обслуживанию

Страница: 35 / 178

35
„
Rear
2
1
7
12
13
14
15
16
18
17
11
10
3
4
5
6
8
9
22
23
21
20
19
2
1
7
12
14
15
16
20
19
22
23
21
18
17
11
13
10
3
4
5
6
8
9
VL-W1500, VL-W1506 VL-W1A00, VL-W1A06
1. USB connector A (2 connectors)
This is the terminal for connecting the USB media or USB mouse.
For registering or saving data in the laser processing machine, connect a commercially available USB.
You can also connect a USB mouse when setting by using a commercially available monitor.
A USB port is also mounted on the front.
ワㄐㄕㄊ㄄ㄆ
• Do not connect the USB devices other than a USB media or a USB mouse.
2. VGA connector: VGA OUT
This is the connector for connecting VGA OUT monitor. When using a separately sold console, connect the attached
return harness.
3. Ethernet port (LAN port)
This is the connector for connecting to the external device to control the laser processing machine with Ethernet. For
details, refer to Serial Communication Command Guide.
If Ethernet is not used for the external control, connect nothing to the Ethernet port.
4. Return connector: RETURN OUT
5. Console return connector: (VGA+RETURN)IN
Connectors for connecting the attached return harness for using console (option).
6. RS-232C connector: RS-232C
This is the connector for connecting to the external device so as to control the laser processing machine with RS-
232C. For details, refer to Serial Communication Command Guide.
7. Signal connector: SIGNAL
This is the terminal for communicating between head and controller. Connect the attached signal cable.
ME-VLW1-SM-8