Panasonic VB-44210G Скачать руководство пользователя страница 67

Страница: 67 / 394

Section 700 - Operation

Chapter 3. System Features

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

Page 3-21

To delete a DID/DNIS Answer Code:

1. Pick up the receiver or press the ON/OFF key.

2. Press

PROG

3. Dial

#95

4. Press

HOLD

5. Press

the

ON/OFF

key.

The

ON/OFF

LED goes off.

Related Programming

• FF1 (System): Number of DID/DNIS Digits to Voice Mail

• FF1 (System): DID/DNIS Flexible Ringing Assignments

Considerations

DID/DNIS digit transmission.

The DID/DNIS digits are only sent to ports

that are assigned as voice mail.

Answer code entry.

The DID/DNIS Answer Code can be entered from an

attendant phone or a key phone that has entered the programming access
code.

VM ports and hunt groups.

The DID/DNIS digits can be sent to a specific

voice mail port or a voice mail hunt group.

Second hunt group.

If the DID/DNIS call rings into a hunt group that in turn

transfers the call to a second hunt group, the DID/DNIS calls are not
transmitted to the second hunt group.

Third-party VM.

This feature can be used third-party voice mail systems. If

the feature is used with third-party voice mail systems, the voice mail can be
connected through analog extension ports or OPX ports.

Call forward ID.

When DID/DNIS calls are forwarded to voice mail, the Call

Forward ID Code is transmitted to the voice mail. The DID/DNIS digits are
not.

DID/DNIS data transmission.

The DID/DNIS digits are transmitted over the

API link using the existing API key code packet.

Содержание VB-44210G











































































































































































































































































































































































































Результаты поиска

Содержание VB-44210G

Отзывы:

Похожие инструкции для VB-44210G

Бренды по названию

Популярные бренды

Panasonic VB-44210G, Руководство пользователя

Результаты поиска

Содержание VB-44210G

Отзывы:

Похожие инструкции для VB-44210G

Бренды по названию

Популярные бренды