Panasonic VB-44210G Скачать руководство пользователя страница 202

Страница: 202 / 394

Chapter 4. Key Telephone Features

Section 700 - Operation

4-86

DBS Manual - Revised April 2000

DBS-2.3/9.2-700

• The

ON/OFF

LED lights.

2. Press

“#4.”

“Enter Time HHMM” appears on the display.

3. Enter the time you wish the Reminder Call to sound. Enter the desired

time in 12-hour format, followed by a “1” for a.m. or a “2” for p.m.

4. Press

the

ON/OFF

key.

• The

ON/OFF

LED goes off.

• “Alarm XX:XX” (where “XX:XX” is the time) appears on the display,

along with an a.m./p.m. indicator.

To cancel the Reminder Call feature:

1. Press

the

ON/OFF

key.

• The phone issues intercom dial tone.

• The

ON/OFF

LED lights.

2. Dial

“#4.”

“Enter Time HHMM” appears on the display.

3. Press

the

ON/OFF

key.

• The

ON/OFF

LED goes off.

• The time disappears from the bottom line of the display.

Considerations

• A sixteen-second alarm tone will be issued at the specified time.

• One Reminder Call may be set for each telephone.

• To change the Reminder Call, simply enter a new time.

• If the extension is in use when the reminder call is scheduled, the reminder

call is issued as soon as the extension becomes available.

Содержание VB-44210G











































































































































































































































































































































































































Результаты поиска

Содержание VB-44210G

Отзывы:

Похожие инструкции для VB-44210G

Бренды по названию

Популярные бренды

Panasonic VB-44210G, Руководство пользователя

Результаты поиска

Содержание VB-44210G

Отзывы:

Похожие инструкции для VB-44210G

Бренды по названию

Популярные бренды