Panasonic VB-44210G, Руководство пользователя

Страница: 237 / 394

Section 700 - Operation Chapter 5. DSLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 5-19
Call Waiting
(All Versions)
Description
You can send a Call Waiting signal, followed by a brief LCD message, to a
busy extension. The party receiving the message need only replace the
handset and then pick it up again to be automatically connected to your
extension.
The following messages can be sent using the Call Waiting feature:
Table 5-4. Call Waiting Text Messages
Message codes 0-4 cannot be used.
Operation
To Set Call Waiting:
1. Lift the handset.
2. Dial the extension number.
3. Upon hearing busy tone, press “3.”
4. If you wish to send a text message, dial the desired message code (5-7 or
9).
The message appears on the called party’s phone if the called party has a
display phone. (If the extension does not have a display, it will continue
to issue a call waiting tone.)
5. Remain on the line until the called party picks up.
To answer Call Waiting (after disconnecting the current call):
1. Replace the handset.
Message
Code Message
5 “Visitor Here”
6 “Need Help”
7 “Important”
9 “Emergency”