Panasonic VB-44210G, Руководство пользователя

Страница: 307 / 394

Section 700-Operation Appendix A. EX 1.0 Feature Update
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 Page A-17
The first device to go off-hook will seize the line (off-hook is either lifting
the handset or pressing the ON/OFF key). If the analog device goes off-
hook first, the large-display phone will be unable to dial or go off-hook.
You can choose which device will ring by going off-hook at either the
digital key telephone or the analog device and dialing
*71 . The digital key
telephone display will reflect “Analog port RING” or “Key Tel RING”,
depending on which device is selected - the default is “Key Tel RING”.
You can still answer an incoming call from either device, regardless of
which device is ringing. For example, if the analog device is ringing, you
can pick up the call on the digital key telephone by going off-hook before
the analog device does. Similarly, if the digital key telephone is ringing or
has not answered a voice call, the analog device can pick up the call by
going off-hook first.
You can program the *71 ring select command into an FF key. Pressing the
key toggles between “Analog Port RING” and “Key Tel RING”. When the
analog port is set to ring, the FF key LED lights red. When the key
telephone is set to ring, the LED is off.
Notes
Phone Restrictions
• The Analog Adapter will work on the large-display phone only (VB-
44225).
• A dial-pulse SLT will not function on the analog port.
• Stutter Dial Tone (indicating Call-Forwarding mode, Do-Not-Disturb
mode, etc.) will not function on an SLT connected to the Analog
Adapter.
• An analog phone connected to the Analog Adapter cannot program or
access speed dials.
Incoming Calls
• You cannot program both devices to ring simultaneously.
• The “*71” code will not work if the other device is in use.
• The “*71” code will not work if FF3 (ExtPort)# 51# is set to “0”.
• If set to “Analog port RING”, the large-display phone will work like an
SLT/OPX (no page announcements, no voice calls from other
extensions, etc.).
• If the phone is in CF/DND (Call-Forward or Do Not Disturb), the phone
will remain in CF/DND even if the ringing device is changed via the
*71 code.
• The incoming ring pattern for the analog device is the same as for the
digital key telephone (determined by the Extension Ring Pattern in FF3
(ExtPort)# 39# (0-9)#). If this address is set to “0” (determined by CO),